Supply bulk electronic ceramics Zirconia powder ZIRCONIUM DIOXIDE

High-purity ultrafine composite yttrium stable zirconium oxide powder used as basic raw materials for making zirconium ceramics, high standard refractory material, optical communication devices, new energy materials.

Yttria-stabilized Zirconia nanopowder for sintering ceramics and structure

high quality zirconia powder as excitation sintering additive

heat-resisting material zirconia oxide nano powder

Factory price ceramic insulating material ZrO2

As Lubricant Additive Nano Zirconium Dioxide Powder

Yttria Stabilized Zirconia(YSZ) powder used in oxygen measuring device(oxygen sensor) of coal-fired power plants.

China factory directly Supply 3YSZ stabilized zirconia dental powder and dental block at good price.

Hongwu Internationg Group Ltd supply zirconium dioxide nanopowder with 60-80nm with 99.9%. 0.3-0.5um and 1-3um ZrO2 powders are also available.

In yttrium-added zirconium oxide, yttrium oxide is used as a stabilizer, and this material is mainly a tetragonal structure. It has the highest flexural strength of all zirconia materials, especially when sintered and pressed. Yttrium stabilized zirconia has fine grains and is suitable for use in cutting tools due to its high wear resistance. It is used to cut a very sharp corner part. The excellent crystal grains make the produced ceramics dense, without many pores, and have excellent mechanical strength, corrosion resistance, impact toughness, thermal shock resistance and extremely low thermal conductivity. Because of these characteristics, yttrium stabilized zirconia is mainly used in wear-resistant parts, cutting tools and thermal barrier coatings.

Transparent conductive film is widely used in optical electrical components, and its performance affects the overall performance of the device. In recent years, researchers have developed many transparent conductive films based on nanomaterials, among which silver nano wires have excellent overall performance.

Silicon Carbide nano particle dosage influencing on composite friction performance       For Silicon carbide nano particle is with Moh’s hardness about 9.2 which is a hard material. With its hardness, SiC nano powder is suitable to be additive for composite material and improve their toughened and strengthened.        For SiC nano additive has different influence to the relative density, hardness, electrical conductivity and friction and wear properties of the composites. Generally the relative density of the composites decreased with the increase of the content of nano SiC particles. The hardness of the composites increased with the increase of the content of SiC nano particles, but when the nano  SiC particles agglomerated, the hardness increased . However the content of silicon carbide nano powder affect to the conductivity of material is opposite. When the content of  SiC nano particle increase the conductivity of the composite decreases. According to some study when the content of SiC particles is about 0.5% -3%, the wear rate of the composites decreases with the increase of SiC content. When the SiC content is more than 3%, the wear rate of the composites increased with the increase of the content of  SiC nano-particles. The abrasive wear and the friction coefficient decreased with the increase of the SiC content. We provide our customers:   High quality silicon carbide particles(50nm,100nm,500nm,1um,5um,7um,10um,15um)   Volume pricing   Reliable service   Technical assistance Our products are all available with small quantity for researchers and bulk order for industry groups.  If you have any questions, please feel free to contact us. thank you. by Lyla